BEVEL machine PROMOTECH SBM 500
Bevel is a side of the plate with beveled edges. The term bevel refers to pieces made at an angle of less than 90 degrees. This machine tool is commonly used for penetration of a welding. The bevel forms angles which to facilitate and produce good welding. Manufacturers / welders often use this technique for welding quality.
Key features
workpiece height up to 100 mm
powerful 7.500 W motor
ergonomic ball roller bench
swarf drawer
supplementary tables to ccommodate long workpieces
pipe beveling attachment for pipes 50-150 mm (2-6”) OD
3D contact wheel control ensures proper workpiece alignment in relation to milling head
very high surface quality
high speed rotary milling head equipped with 10 inserts
cutting inserts dedicated to various materials
no heat affected zones or distortion of the workpiece
easy access to milling head and cutting inserts
precise setting of bevel angle from 15 up to 60 degrees and bevel width up to 30 mm
continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum

High speed rotary milling head equipped
with 10 inserts

Auxiliary tables to accommodate long workpieces

Suitable for various materials incl. different types of steel and aluminium

Very high surface quality

Precise bevel angle adjustment

Capacious swarf drawer

Posibility of pipe OD beveling

Simple setting of bevel width

Easy access to milling head and inserts
Technical Specification
Voltage |
3~ 400 VAC + N+PE, 50/60 Hz |
Power |
7500 W |
Spindle speed (no load) |
500 - 2920 rpm |
Feed rate |
up to 3.3 m/min |
Feed by contact wheel |
YES |
Bevel angle range |
15 - 60° with continuous angle adjustment |
Bevel width |
up to 30 mm |
Milling head with 7 inserts |
YES |
Min. dimensions of a bar |
50x150x3 mm |
Max. workpiece height |
up to 100 mm |
Weight |
850 kg |